Is Nano Cemento a sealer coating?
Clearly not. Nano Cemento is Cementicious based product with selected marble aggregates which allows topping natural surfaces.
Would it be possible to use Nano Cemento for external use for outside floors & wall coverings?
Absolutely! Nano Concrete is a coating durable against all weather, high abrasion, water exposure and high temperature difference.
Can you install Nano Concrete floor over sub-floor heating system?
Nano Concrete was developed especially to endure up to +70 Celsius and down to -70 Celsius in order to resist harsh weather conditions and to be installed over sub-floor heating systems.
Can I use Nano Concrete in Bathrooms and shower without worrying about water exposure?
Nano Concrete is being installed constantly in bathrooms, showers, Sink Coating, kitchens, no problem with water if being sealed properly with a topcoat.
Would I have to remove the existing floor and spend a fortune in order to install Nano Concrete?
Nano Concrete is a 3 mm cementicious coating, designed especially to go over existing floors and walls. Nano concrete can be applied over tiles, wood, metal, concrete, marble and more. Since the thickness is only 3 mm, it is a huge advantage since to floor removal is required and no need to lift doors inside houses, plus you end up with a work of art floor with a custom design.
Who is certified to install Nano Cemento?
In Israel, Art Floor's professional staff is the official and only installer team that has certification and approval to install the Nano Cemento system, after receiving proper instructions in Italy by the Nano Cemento Developers – Next Concrete.
Site by Feuerstein Design
Decorative Concrete Stamping
Where Can I do Concrete Stamping?
Concrete Stamping can be installed on Balconies, around swimming pools, car driveways, walkways, entrances to buildings & public spaces, and endless more options.
Will the stamped concrete color fade?
Art Floor provides the leading products in the decorative concrete industry. We use specially produced colors which penetrates the layers of the concrete, and thus keeping the pigments beautiful and opaque for many years, without any special maintenance other the cleaning the surface. In addition to our formulated concrete top coats, we seal the concrete to prevent stain penetration to the concrete.
What are the advantages of concrete stamping over other external options?
In the long run, simple and inexpensive maintenance significantly longer life span. Also, it allows Artistic addition to the area and increasing its value. No need to spend a fortune on watering plants or top coating wood every year.
Is it possible to prevent the concrete from cracking?
One of many advantages of ART FLOOR is the fact that we provide the surface preparation before pouring the concrete as well. We will use the most High-Tech technology and knowledge, by industrial standard and over 30 years of experience, in order to prevent cracks and controlling them. However, Concrete cracks, especially during the first 6-12 months. This is mainly due to water evaporation and the fact that the ground is moving. This is why we cut control joints. More than that, we make decorative concrete, so we can use the cracks in our advantage and cover it with our design & coloring.
How thick is Stamped Concrete?
There are two ways to apply stamped concrete. One is pouring concrete with wood support and an iron net to reinforce the surface, and that will be between 7-15 cm thick.
Since ART FLOOR is always looking for new solutions and technology, we found a specially made concrete from Italy, that can be applied with the minimum thickness of 1.5 cm only! This gives us the options of applying concrete on an existing subfloor, without removing it and digging! Very cheap and effective way of making decorative stamped concrete…
Can you drive on stamped concrete?
You sure can! One of the biggest type of application for stamped concrete, are car garages and parking lots. Using our unique concrete colors and patterns, we make concrete fantasies come true.