Certified installer · Topcret Spain
Topcret is a Spanish microcement manufacturer with around 20 years of experience and thousands of projects worldwide. Art Floor is a certified installer of its systems — from the living-room floor to the pool in the garden.
We work only with original Topcret systems — the same mixes, sealers and tools the manufacturer approves.
We've completed Topcret's training and apply to the manufacturer's specification — layer after layer.
Over 40 base colours, plus the option to match a colour to a sample you bring.
Most systems are water-based, VOC-free and odourless — you can stay at home while the work is done.
The continuous coating that built Topcret's name: a thin layer over the existing surface, for floors and walls, with no demolition and no joints.
Water-based microcement for floors that work hard — shops, lobbies, public buildings. According to the manufacturer: 3 times more resistant than standard microcement.
The first microcement free of volatile organic compounds (VOC). Suitable for children's rooms, kitchens and anywhere air quality matters.
A breathable clay coating with a soft, natural look. The Hydro+ version is waterproof even before sealing — so it can go in the shower too.
A low-voltage electric heating system integrated into the microcement layer — a warm floor or wall, with no radiators and no demolition.
Microcement with real metal powder inside the material — not metal-look paint. A continuous, uniform surface in the colour of real metal.
A waterproof coating for pools, resistant to pool-water chemicals and UV radiation. Renew your pool without removing the old mosaic.
Technical data according to the manufacturer's publications. The photos on this page are from our own projects. Topcret® and the system names are trademarks of Topcret.
Topcret was founded in 2005 in Barcelona by two engineers who developed Microcemento® — a comprehensive way to renew spaces without demolition and without waste. Today: an R&D laboratory, a subsidiary in London and 80 franchisees across several continents.
A written guarantee on material quality, plus a warranty and insurance programme: defective material is repaired or replaced free of charge for 3 years. The manufacturer produces in its own laboratories and facilities, with full traceability from batch to application.
Ecocemento® and Baxab®Eco are the first microcements with an Environmental Product Declaration (EPD), VOC-free and water-based. 15% recycled raw material, only 2 mm thick — far less material, energy and water than a conventional floor, and no demolition waste.
An integrated management system to ISO 9001 (quality) and ISO 14001 (environment), a laboratory with technical support for customers, and third-party testing to UNE-EN standards. Colours are produced in a controlled process designed to eliminate colour deviations.
Full data sheets and test results are in the technical documents.
Only applicators trained by Topcret. The manufacturer doesn't sell material to professionals who haven't been trained — that way it can guarantee both the material and the workmanship. Art Floor is a certified installer in Israel.
No. There's no debris, the work is quick, and you can walk on the surface after 24 hours.
Almost any stable surface: ceramic, porcelain, cement render, tiles, plaster, plasterboard and marble — without removing what's there. Wooden floors and parquet move, so they must be removed first.
Polished concrete is over 6 cm thick, needs expansion joints and cracks much more easily. Microcement is about 2 mm over the existing surface, a continuous surface with no joints, and comes in a wider range of finishes and textures.
Yes, the materials are fully suitable. You just need to take care with substrate preparation.
Yes, provided the substrate is properly waterproofed and has the correct falls — to prevent rising damp and puddles.
Any Topcret coating can receive a T/Grip anti-slip treatment. The slip-resistance class is set according to the standard required for the space.
Water and neutral soap. From time to time add a gloss wax diluted in water, which renews the protective layer. No solvents or aggressive chemicals.
No — the application cost is the same. An extra is needed only if the substrate is badly damaged and requires a levelling layer or an additional base.
Yes. There's a renewal system that removes signs of wear, and technically the colour can also be changed over an existing coating.
Send a few details — or a WhatsApp photo of your current floor — and Avshi will get back to you with an initial estimate and arrange a visit.